Digital Information

# Changelog for InkZonePerfect-InkZoneLoop v8

Return to download

# [8.23.11.21] - 2023-11-21

# Added

  • improved linearization for back side job when using a single side calibration curve
  • new setting for IZLink setup to remove invalid char from job nam
  • improve the job data size for inline color-control jobs
  • press connection to TGC Grafitel
  • new settings to control log data size

# [8.0.135.7] - 2023-08-09

# Added

  • firmware loader for InkZone hardware

# [8.0.135.6] - 2023-07-24

# Added

  • support for web machine GOSS M600 with dual console connecting to IZLink

# [8.0.135.5] - 2023-07-10

# Added

  • new config entry to limit the number of CIP3 scheduled jobs which were not printed
  • new version for IZScreenControl v2.33 for IZNetHeidi

# Changed

  • job name from 3rd party scan software is not used anymore when the ink-preset is made with InkZonePerfect

# [8.0.135.2] - 2023-07-01

# Changed

optimized command structure for the InkZoneCockpit communication

# [8.0.135.1] - 2023-06-27

# Changed

  • reset ink-key mask when starting with a new job when using InkZoneLoop in standalone mode

# [8.0.135.0] - 2023-06-22

# Added

  • communication to Magnetic strip emulator for Komori Web with single console desk where the desk controls both sides.

# [8.0.134.9] - 2023-06-13

# Added

  • optimized purging old pre-press jobs and linearization data from database
  • optimized ink-key data handling with the IZRCI2 program

# [8.0.134.8] - 2023-05-15

# Added

  • optimized procedure to handle pre-press job data
  • optimized procedure to handle linearization job data

# [8.0.134.6] - 2023-04-13

# Changed

  • optimized new job setup for "color-control only" when connecting to IZMove

# [8.0.134.4] - 2023-04-12

# Fixed

  • when using a "color-control only" setup, the IZMove job setup data was not correctly processed in InkZoneLoop

# [8.0.134.1] - 2023-03-31

# Added

  • add IZControl for Ryobi press control
  • new version IZPlotClient v8.0.4.2
  • new version IZNetHeidiScreen v1.0.2.30
  • new touchdata.ini templates for IZNetHeidiScreen
  • new version IZXMLConnector v1.44 for better support of Asian characters

# Changes

  • further optimized the job setup file for X-Rite SW v3

# [8.0.133.0] - 2023-02-01

# Fixed

  • fix the problem for the linearization error "jobs have different zones between prepress and press"

# [8.0.132.5] - 2022-12-22

# Added

  • installs IZ-Plot client application automatically
  • add *.lab color data for calibration curves. The RGB values are applied automatically during the import

# [8.0.131.0] - 2022-09-20

# Added

  • when using IZ-Plot, job color separation are shown in job preparation view
  • in press setup, a list with press parameter is provided
  • the standard "spot calibration curve" can not be deleted anymore
  • create a job setup file for X-Rite v3 software

# Fixed

  • improve the ink-preset connection to manRoland R200 console
  • improve the job list build up when there are several 1000 jobs
  • improved handling for varnish color names when using InkZoneMove

# [8.0.129.2] - 2022-05-25

# Added

  • improved database management for the system setup where the InkZone prepress job database is shared between multiple InkZone stations

# [8.0.129.1] - 2022-05-11

# Added

  • progress indicator during ink-preset ductor setup with IZNetHeidi2
  • test connection button for press connection with E-Floppy2
  • new IZHeidiScreen for PressCenter screen calibration

# Fixed

  • linearization jobs were not working when the job name contains [ , ] chars

# [8.0.128.5] - 2022-03-21

# Added

  • add job information dialog to ink-preset and color-control working screen

# Changed

  • simplified spot color handling for InkZoneLoop - IZCockpit configuration
  • add latest version IZHeidiControl v8.8.18 with stability improvements for SM52 press consoles
  • add latest version IZMitsubishiWire 8.8.10 with new console connection

# Fixed

  • for archived jobs, the ductor - sweep value was not correctly set

# [8.0.127.1] - 2022-03-03

# Fixed

  • InkZoneLoop would freeze after several scans when license is without ink-preset
  • for a perfecting job, the status on the InkZoneMove "transfer" button was incorrectly displayed after transfer correction to press console

# Added

  • read color preview from SVF-TVF data
  • add JDF parameter editor for InkZone job setup for Expresso and X-Rite

# [8.0.126.2] - 2022-02-03

# Added

  • for inline installation: set transfer counter to zero after a new job starts

# [8.0.126.1] - 2022-02-02

# Fixed

  • pre-press job list was not refreshing for new inserted jobs

# [8.0.126.0] - 2022-01-28

# Fixed

  • installer created a wrong directory structure

# [8.0.125.0] - 2022-01-28

# Fixed

  • ink-key opening were incorrectly displayed

# Added

  • process scan data for a reverse perfecting press setup

# [8.0.124.0] - 2022-01-17

# Changed

  • new installation process with the requirement to run first the Unified InkZone installer
  • improved CxF import functionality to cope with different CxF dialects
  • improve ink-preset linearization process with large amount of data

# Fixed

  • ductor value fix for IZWireMitsubishi v8.08.06

# [8.0.123.6] - 2021-12-20

# Added

  • progress indicator when importing large CxF data sets
  • output to IZWireMitsubishi

# [8.0.123.0] - 2021-12-08

# Added

  • start and stop press connection driver IZLoopConnect from IZ8 UI
  • improved handling of job names where problematic characters were used

# Fixed

  • fix ink key scale 0 to 250 issues in software setup

# [8.0.121.0] - 2021-11-11

# Added

  • add in linearization editor the possibility to manually modify the calibration curve shape
  • add the possibility to create perfecting jobs when the jobs do have different status such as archive and printed
  • add support for Ryobi RM1 data

# Fixed

  • fix an error when trying to delete jobs

# [8.0.120.2] - 2021-10-21

# Fixed

  • fix linearization process when using InkZonePerfect with InkZoneLoop
  • fix ink-key value modification in press preparation for manRoland console
  • fix for multiple page jobs when pages have different color separation

# Added

  • improved stability on the data export of IZLoopConnect

# [8.0.119.1] - 2021-10-02

# Added

  • improved license information
  • support GOSS DAT format for hotfolder processing

# Fixed

  • fix for readback problems with IZLoopConnect KBA COL/GRO press format
  • improved press communication to KBA Densitronic in auto-transfer mode

# [8.0.118] - 2021-08-17

# Added

  • release version InkZone 8