1.1.2.4. Change Target Density with <Group Ink-Keys> feature

1.1.2.4. Change Target Density with <Group Ink-Keys> feature
1

Target change

1. Target change
Change through the plus or minus button the group's ink-keys.
2

Select individual target

2. Select individual target
Select the icon individual density target and apply target density changes to a range of keys through the +/- buttons from (1)
Note: it's possible to select more than one unit
3

Setup Ink-Key Groups

3. Setup Ink-Key Groups
To setup ink-key groups see here: 1.2.1.5. Ink-Key Groups