1.1.1.1. Job Setup and Commands

1.1.1.1. Job Setup and Commands
 
1

Job information

1. Job information
A click here opens the setup information view from the current job.
2

Job status

Indicates job status as MakeReady / OK-Sheet / Production
Change job status, see here: 1.1.12. Job Status
 
Status MakeReady

 
Status OK-Sheet / Production
 
 
3

Ink-Key regulation

3. Ink-Key regulation
In the job setup screen click on the unit to display the ink-key regulation modifier.
See here: 1.1.1.1.1. Ink-key Regulation modifier
 
 
4

Ink name / Unit number

4. Ink name / Unit number
Displays the ink name and its unit number
5

Job configuration
Key Setup and Targets

5. Job configuration Key Setup and Targets
Select predefined ink-key groups.
See here:  1.1.2.4. Change Target Density with <Group Ink-Keys> feature
 
Set color targets and ink-key mask from existing job, see here: 1.1.1.1.2. Targets from Existing Job
 
 
 
6

Command area

6. Command area
Click on the logo to return to the home screen
 
Clone current job

 
Set current job setup as template nr. 1.
A job template reuses targetset, colorbar, print sequence and machine setting
 
Set current job setup as template nr. 2.
A job template reuses targetset, colorbar, print sequence and machine setting
 
Create an archive jobs in InkZonePerfect


 
Creates an ink-preset linearization job in InkZonePerfect
 
7

Measurement export

7. Measurement export
Activate the automatic measurement data export such as SVF etc after every scan.
 
Data from units before perfector
Data from units after perfector
 
See setup here: 1.2.8. Data Export Setup
 
8

Go to Measurement View

8. Go to Measurement View
1.1. Measurement view
9

Go to Job Setup

9. Go to Job Setup
1.3.2. New Job