1.1.15. Measure and Transfer Button
The button on the right starts a scan measurement with the instrument. The one on the left transfers ink-key changes to press console for color-control adjustment .
TRANSFER SCAN
Return to 1.1. Measurement View
|
Transfer button for color control
|
Scan button
| ||
|
Transfer button turns orange after successfully scanning the press sheet.
Ink key correction for color control is available.
|
 |
Progress bar indicates instrument is in scan mode
|
 |
|
Progress bar indicates ink-key correction is being transferred to press console
|
 |
Progress bar indicates instrument finished scan and scan data is displayed
|
 |
|
Ink-key correction for color-control is successfully transferred
|
 |
|
|
Automate the transfer by changing the auto-key correction transfer after a scan.
See press setup: 1.2.1.2. Advanced Press Settings