1.2.3.2. New Targetset

1.2.3.2. New Targetset
1

Targetset name

1. Targetset name
Set an unique name for the color targetset.
A targetset is used for every job to define its color standard
2

IZPerfect
calibration curve

2. IZPerfect calibration curve
Select here the ink preset calibration curve used by InkzonePerfect when a new job is prepared. 
When a new job is sent from InkzonePerfect to IZMove the "calibration curve" information is passed to IZM. With this information, IZMove loads the corresponding, or let's say linked,  targetset in IZMove automatically.
See 1.2.3.2.1. Calibration Curve InkzonePerfect
 
3

DeltaE method

3. DeltaE method
 
Select the DeltaE formula to be used.
4

Substrate backing

4. Substrate backing
 
 
Choose between black and white substrate backing.
 
The ITX and ETX are always black backing. ISO requires black substrate backing.
 
5

TVI curve

5. TVI curve
 
Choose between the TVI curve definition from 2004black and white substrate backing.
TVI 12647-2 2013
 
TVI 12647-2 2004
 
 
6

Scoring

6. Scoring
 
Select the scoring set. See here: 1.2.5. Scoring Setup
7

Return to Targetset & Tolerance Setup

7. Return to Targetset & Tolerance Setup
1.2.3. Targetset & Print Tolerance Setup
8

Return to Colorimetric View

8. Return to Colorimetric View
1.1.4. Colorimetric View
9

Return to New Job

9. Return to New Job
1.3.2. New Job