Shifted ink-key alignment
Use the following setup parameters when the colorbar is not printed centred over press machines ink-keys.
1) Setup press with “shifted” ink-key alignment
1) Advanced press settings
2) Choose centred and shifted
2) Job setup
1) During job setup, choose extended job setting.
2) Select shifted
3) Select the ink-key number where the color bar starts
4) Select an offset of 0 or ¼ or ½ or ¾ within the selected ink-key (selected at 3)
3) Change colorbar parameter during print
1) Select colorbar menu
2) Set-up the colorbar positioning parameter
