1.1.16. Spot Measurement

Use a spectrophotometer for single spot measurements and compare colors. Apply the measurement as the print target for a spot color.
1.1.16. Spot Measurement
1

Start measurement sample

1. Start measurement sample
Place the spectrophotometer over the sample and start measurement.
2

Assign to print unit

2. Assign to print unit
First measure the color sample which becomes the print target. Then, apply it as
the new Lab and density target  to a print unit .
 
Select the print unit in the upcoming dialog:
 
3

Paper white calibration

3. Paper white calibration
Executes a paper white calibration
4

Select from Targeset

4. Select from Targeset
Select a reference color from a targetset
5

Start measurement reference

5. Start measurement reference
Place the spectrophotometer over the sample and start measuring
6

Measurement data

6. Measurement data
Shows measurement and reference data and their color difference as
DeltaE 76, DeltaE 2000 and Delta H
7

Go to Navigation Bar

7. Go to Navigation Bar
1.1.1. Navigation Bar