 Machine type
Machine
|
 Console's ink-key direction
For some web presses with two consoles, one for upper side and
one for the lower side units, the ink-key direction on the console desks
are not necessarily the same.
On one console side the key nr 1 is on the left which means to use
the setting "Lowest to highest inkkey", e.g. 1 to 32.
For the other side, the ink key on the left is the highest and
the lowest is on the right, e.g. 32 to 1.
For this case change the ink-key direction to "highest to lowest ink key".
|
 Press units
Each print tower indicates an upper and lower print unit.
A press with 4 print towers is setup with 4 units.
Note:
in IZPerfect/Loop version 6 and 7 you still need to setup 8 units for such web press.
|
 Go to Press Setup
|
|