1.7.1.1. Advanced features

1.7.1.1. Advanced features
1

Side ink-key management

1. Side ink-key management
Allows the operator to setup the ink-key opening of the side ink-keys with an arbitrary value.
 
1) Automatic needs to be disabled
2) Define the ink-key opening value
3) Define the number of side keys. E.g. a value 2 sets ink-key nr 1 and 2 plus the last two ink-keys as side ink-keys.
 
 
2

Side ink-key value

2. Side ink-key value
The side ink-keys are automatically set to selected value.
In the press preparation screen, enable through the advanced button, left hand side of the transfer button.
3

Ink-key profile smoothing

3. Ink-key profile smoothing
Smoothing is applied to the ink profile.
4

Console ink-key range

4. Console ink-key range
Typically, the feature is enabled for MAN consoles where the ink-keys are set between 0 and 250.
5

Reverse perfecting

5. Reverse perfecting
To assign the F side ink-preset data to the units after the perfector.
6

Job side indicator

6. Job side indicator
Change the indicator of the front and back side:
F/B
A/B