1.7.3.4.1. Configuration

1.7.3.4.1. Configuration
1

Input setup

1. Input setup
Configure up to 3 different pre-press input locations and their pre-press job name scheme.
2

Setup name

2. Setup name
Set a name for the setup, e.g. the Pre-Press workflow system.
3

Hot folder input

3. Hot folder input
Location of the hotfolder for the XML / PNG data.
4

Pre-Press job name scheme

4. Pre-Press job name scheme
Setup the job name format with the indicator for job name, sheet number and sheet side.
Each element is separated with an underline, like “_”.

Sample               %JOBNAME%_%SHEETNUMBER%_%SIDE%
 
5

Elements

5. Elements
Add from the element for the job name scheme.
6

Identify sheet number

6. Identify sheet number
In some cases, the sheet number information starts with string or a char, like "P001", "P002" or "FOLD1", "FOLD2". In this case add this part here. With the example before, add "P" or "FOLD".
7

Identify side

7. Identify side
Side indicator. It could be "_F / _B" or "_Front / _Back" or "A / B" etc.
When there is no such indicator but the sheet number identifies the side, select from the check box either %Even% or %Uneven% for the sides.
8

Samples

8. Samples
A list with samples. Select one with a click on the name.
9

Return to XML Connector

9. Return to XML Connector
1.7.3.4. XML Connector - Prepress connection