1.6.1. Preview

Color selected

A list with all jobs selected for linearization. With a click on the job name, the data is ignored for the curve adjustment.

Filter to exclude ink-key which do not match a density and DeltaE deviation.

See here 1.6.1.1. Filter

Tool tip information for calibration curve point.

Read like:
- for the ink-coverage of 40% (1), the calibration curve opens an ink-key (new) to 31.1 (2).
- before the calibration run, the calibration curve opened the ink-keys (old) to 29 (3).

Recalculated calibration curve.

- Green dots match the filter selection.

- Red dots do not match the filter and are excluded.

- Yellow dots are side ink-keys and are excluded.