1.4.2. Color-Control overview

1.4.2. Color-Control overview

Select ink-key view

Select the data view.

		Plate coverage
		Ink-key profile sent to press.
		Ink-key data received from press. The press data is displayed after the console stores the job data to InkZone.
		Ink-key data of the archived job. The data is visible after the console stores job data to InkZone and the archive button is pressed.

Ink-key relative

Ink-key correction in relative view is displayed after receiving scan data (default view).

Ink-key absolute

Ink-key correction in absolute view is displayed after receiving scan data.

See here: 1.4.2.1. Ink-key absolute view

Density relative

Measured density data in in relative mode
See here: 1.4.2.2. Density relative view

Density absolute

Measured density data in absolute mode

See here: 1.4.2.3. Density absolute view

Density target

The target density set by the measurement software.

See here: 1.4.2.4. Density target view

DeltaE

DeltaE view.

See here: 1.4.2.5. DeltaE view

Ink-keys

Ink-keys displayed in relative view. The ink-key corrections data is calculated by the InkZone color-control engine.

Ductor

Ductor / sweep value

Save job

Store job data to the archive or to the linearization job list.

The job data can only be stored when ink-key data was stored from press to InkZone.

		Archive job data.
		Store data to for linearization and optimization of the calibration curve.

Synchronize

Synchronize ink-key and ductor with press

Calibration curve

The name of the calibration curve used for ink presetting the press.

Sheet information

Scan measurement number with scan side indicator and time.

Print status

Print status.

		MakeReady mode
		OK-sheet is set.
		Production mode

Go to Home