1.7.4.4. Advanced settings

1.7.4.4. Advanced settings
1

Use with IZMove

1. Use with IZMove
Enable when InkZoneMove is the scanning software.
2

Use with IZReport

2. Use with IZReport
Enable when a 3rd party software is the scanning software.
3

Create JDF

3. Create JDF
Enable JDF job setup for 3rd party scanning software.
4

JDF path

4. JDF path
Select here the JDF export path. See here: JDF export - setup
5

Use IZCockpit

5. Use IZCockpit
Enable when a 3rd party software is the scanning software.
6

Auto transfer

6. Auto transfer
The ink-key correction is sent automatically to press console after receiving new measurement data.
7

Auto return

7. Auto return
Return to InkZoneLoop screen, in seconds. Useful setting when InkZoneLoop is in background and new measurements are required to be processed.
8

BestMatch setup

8. BestMatch setup
Set BestMatch density to measurement with lowest DeltaE. The DeltaE has to be lower than the value set here.
9

Regulation adjustment

9. Regulation adjustment
Step width applied to the regulation parameter when colorcontrol parameter is changed from InkZoneMove or InkZoneCockpit.
 
InkZoneMove - change regulation strength
 
InkZoneCockpit - change regulation strength
 
 
 
 
10

Return to InkZoneLoop setting

10. Return to InkZoneLoop setting
1.7.4. InkZoneLoop settings