1.1.2.3. Key Group Selection

1.1.2.3. Key Group Selection
1

Start group selection
with click

         1. Start group selection with click
Click on the first key from an ink-key group. The key start to blink.
2

End group selection

 with click

 2. End group selection with click
After selecting the last ink-key, an ink-key group is selected
and is indicated by a green overlay on the plus and minus buttons.
3

Modifiy target density

3. Modifiy target density
Change the target density with the plus and minus button
4

Go to Densiy Relative View

4. Go to Densiy Relative View
1.1.1. Density Relative View
5

Go to <Group Key> feature

5. Go to <Group Key> feature
1.1.2.4. Change Target Density with <Group Ink-Keys> feature