InkZoneMove
www.digiinfo.com
×
Menu
Search
 
   
   
   
 
  (c) Digital Information, 2024
 

1.2.6.9. Scan Parameter Setup

 
1.2.6.9. Scan Parameter Setup
1

Instrument backing

1. Instrument backing
Set instrument backing to black or white (substrate backing).
 
Note: the targetsets are linked to the backing parameter white or black.
A white backing selection in the instrument setup will force the software
to show only white backing targetsets whereas a black selection shows only
black targetsets.
 
 
2

Illumination

2. Illumination
Select the illumination.
3

Density filter

3. Density filter
Select the density filter.
4

Observer

4. Observer
Select the observer.
5

Polarization density

5. Polarization density
Activate/deactivate the polarization filter for density reading
6

White reference density

6. White reference density
Select the white reference for density measurement.
7

Polarization colorimetric

7. Polarization colorimetric
Activate/deactivate the polarization filter for colorimetric reading
8

White reference colorimetric

8. White reference colorimetric
Select the white reference for colorimetric measurement.