1.1.14.1. Single Patch View

Preview all color information from a single patch by clicking on the patch in the ink key view.
 
1.1.14.1. Single Patch View
1

Spectral remission

1. Spectral remission
Spectral remission in graph and table view.
2

Ink-key and unit number

2. Ink-key and unit number
Indicates ink-key number and print unit.
3

Select a single patch

3. Select a single patch
Clicking on a patch opens the single patch view.
4

Spectral density

4. Spectral density
Spectral density of the patch by default used for spot colors.
5

Density K C M Y

5. Density K C M Y
The four densities calculated by their filters cyan, magenta, yellow and black (visual). The highest density value is automatically highlighted. The top row shows the measured patch the row below is the target value.
6

Color data Lab

6. Color data Lab
Color values as Lab with top row from measured patch and its target below.
7

Color difference

7. Color difference
Calculated DeltaE and DeltaH.
Note: the DeltaE method (CIE76, D2000, etc) is set in the targetset, see chapter 1.2.3.3. Edit Targetset
8

Go to Ink-Key Patch View

8. Go to Ink-Key Patch View
1.1.14. Ink-Key Patch View
9

Go to the Measurement view

9. Go to the Measurement view
1.1. Measurement View