1.1.16. Spot Measurement

Use a spectrophotometer for single spot measurements and compare colors. Apply the measurement as the print target for a spot color.

Start measurement sample

Place the spectrophotometer over the sample and start measurement.

First measure the color sample which becomes the print target. Then, apply it as

the new Lab and density target to a print unit .

Select the print unit in the upcoming dialog:

Executes a paper white calibration

Select a reference color from a targetset

Place the spectrophotometer over the sample and start measuring

Shows measurement and reference data and their color difference as

DeltaE 76, DeltaE 2000 and Delta H