Scan parameter setup
|
|
Sheet orientation
|
|
Connection
Setup the SpectroDens IP configuration with SpectroConnect.
For IZM, setup the IP address and enable the Wifi setting.
An USB connection is used when the Wifi setting is off.
|
|
Specifications
Producer
|
Techkon
|
Min. patch size
|
6 mm without contrast bar (patch separator)
|
Scan length max
|
200 patches in 10 sec
|
Connected by
|
USB or WiFi
|
Measurement Conditions
|
M0, M1, M2, M3
|
Comment
|
Colorbar scanning for color-control is only supported with SpectroDens Premium
|
|
|
Return to Scanning Device Setup
|
|